Fork assemblies, bale assemblies, grip attachments, lifts – with our lifting implements you’re assured the best possible durability, user benefits and productivity.

  • Implements have a choice of hooks for use with most brands of loaders
  • Different implements in size and application to satisfy all requirements
  • Highest quality steel, bearing, rams etc used throughout

Maximize your loader, and choose your implement

We’ve the finest collection of Alo Implements here at Choose your implement below, and maximize the use of your loader.

implements-logo (1)


Our hydraulic pallet forks are a productivity enhancing option which is simple to retrofit. This solution enables perfect sight from inside the cab, to position the exact required distance between the pallet forks. The result, of course, is that all pallet fork work can be carried out much more comfortably and efficiently. Suitable for all our ISO pallet fork frames manufactured since December 2012.

Weight (kg/ibs) 73/360
Weight assembled (kg/ibs) 169-181/372-398


The upper profile is made in one piece. This profile with holes for lateral adjustment provides robust securing of the forks. The load is distributed over a large area thanks to the wide load-bearing surfaces of the forks. With this special design, breaks in the arm are avoided and you get to operate a very stable fork that does not “dangle”. The forks are naturally approved with a large safety margin.

Max.load 1,000 kg 1,600 kg 2,500 kg
Weight 155/163 kg 175/187 kg 217 kg
Width 140 cm 140 cm 140 cm
Fork length 97/122 cm 97/122 cm 122 cm
Fork height 94 cm 94 cm 94 cm
Fork type forgings forgings forgings


The height of the hook above the ground is normally the same as when the bottom of the large bags is level with the lowest point of the front loader when the bags are hanging from the big bag lifter. Note the practical benefit of having the hook bent to the side. The hook can easily be seen from the driver’s seat.

Weight 118 kg
Max. load 800 kg
Width 120 cm
Height 170 cm


Suitable for 1,000 kg, 1,600 kg and 2,500 kg fork kits.

Weight 85 kg

Your Choice Implements Hooks

Quicke does not only give you the largest range of implements. Our implements also have a choice of hooks for use with most brands of loaders.



Implement hooks suitable for Quicke series Q, Trima with W-frame and other loader brands with Euro implement carriers.



Suitable for Quicke Combi mount, Trima/Bergsjö with SMS- mount, Kellve/Vreten/Howard and any loader with SMS implement carrier.


C: ÅLö TypE 3

Suitable for wholly hydraulic loaders previous to Quicke Series Q. Some implements will also fit loaders with the large and the small implement carrier from BM.

ikon-selectofix SELECTO FIX*

Save time and avoid problems.
Selecto fix is a great option if you are regularly coupling and uncoupling hydraulic implements. With a simple movement, the implement hydraulics are coupled, easily and without any problems, even when the system is pressurized. Your work is resumed within seconds. This system also greatly reduces the risk of dirt entering the hydraulic system.


View Brochure

Click here to view or download the brochure.

View Quick Loaders

Click here to view more Quick Loaders.

View Product Page

Click here to view the full product page on the manufacturer's website.

Scroll to Top