SILAGE IMPLEMENTS
Versatile, wear-resistant, productivity-boosting – just some of the advantages of our complete range of silage grips. Just like all our other implements, the grips are developed in close cooperation with Irish farmers which ensures durable, well designed silage implements.
MAXI GRAPPLE™
The bucket is based on the powerful, reinforced HD bucket. The grapplearm is installed on the rear of the bucket, which also contributes to the implement’s strength. The movable, profile-pressed upper section is supplied with strong bearings, three-layer bushings and large pivot pins with stable locking. The section with the powerful Hardox teeth is bolted in place. Stress and torsion forces are thereby transmitted to the entire construction. The teeth (version T) are simply bolted in place with a bolt in the bucket bottom. The protective mesh means that loose material does not drop down onto the tractor (optional extra).
Maxi Grapple is used particularly in the USA and Canada for handling round bales (large opening of 2 m), loose hay, twigs and branches, loose silage, manure and for general bucket work. Teeth, protective mesh and grapple arm can easily be removed when only the bucket is to be used.
| Maxi Grapple | 210 | 210 T | 240 |
| Weight | 605 kg | 620 kg | 640 kg |
| Width | 210 cm | 210 cm | 240 cm |
| Depth | 81 cm | 81 cm | 86 cm |
| Teeth | - | 24 cm | - |
POWERGRAB™
Your needs, our inspiration. Powergrab is a very powerful implement with improved cutting quality, higher strength and still very high working speed. When filling silage into the bucket, the bucket tip is pushed into the silage at a 45° angle which ensures maximum cutting force. The strong upper arm is powered down through the silage and into the conically shaped bucket. The sharp teeth allow for a clean cut which ensures silage quality.
Powergrab has a unique conical shape, this makes it easier to empty the material from the bucket. The cutting teeth are designed in such a way, so that it is possible to pick up silage right against the silage wall. Thanks to its incredible strength and the improved angle on the upper arm in its open position, Powergrab can also be used for many other demanding fork and bucket tasks.
| Powergrab | 185 | 210 | 240 | 260 |
| Weight | 540 kg | 650 kg | 690 kg | 780 kg |
| Width | 185 cm | 210 cm | 240 cm | 260 cm |
| Volume | 1,0 m³ | 1.15 m³ | 1.30 m³ | 1.40 m³ |
| Depth | 82 cm | 82 cm | 82 cm | 82 cm |
SILOCUT® SG
The new Silocut features welded tine sleeves, bolt on knifes, conus 3 tines and upgrades that improve serviceability. Unlike competitors, Silocut knives bolt on and can be purchased as a spare part to ensure they are always kept sharp.
Thanks to the hardened cutting knifes on the front edge and sides of the Silocut, it leaves a clean cut surface in the silage. Angled side knives cut against the side plates to ensure the material is cut towards the rear of the Silocut, preventing tearing and create a clean side cut. By having a clean cut, it prevents air getting in and generating heat which is critical for feed quality while consuming less silage by reducing waste. Manageable cut blocks can be transported in compressed form, reducing handling time.
Silocut 175 SG, is a new model at 1.75 m width with 2 cylinders and weighing 524 kg, light enough for users wanting more volume in the 60-100 hp range of tractor. This fits in a new width range of 1.25 m – 2.25 m, with 25 cm increments between each model. Larger 3 cylinder models at 2 m and 2.25 m have hooks are available for BM / JCB wheel loaders as well as Front Loaders.
| Width (cm) | 130 | 150 | 170 | 190 | 210 | 230 | 250 |
| Number of Tines | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| Depth (cm) | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| Weight (kg) | 280 | 304 | 360 | 386 | 423 | 447 | 447 |
| Capacity (m³) | 0.66 | 0.76 | 0.86 | 0.96 | 1.07 | 1.17 | 1.27 |
MULTIBENNE
The new Silocut features welded tine sleeves, bolt on knifes, conus 3 tines and upgrades that improve serviceability. Unlike competitors, Silocut knives bolt on and can be purchased as a spare part to ensure they are always kept sharp.
Thanks to the hardened cutting knifes on the front edge and sides of the Silocut, it leaves a clean cut surface in the silage. Angled side knives cut against the side plates to ensure the material is cut towards the rear of the Silocut, preventing tearing and create a clean side cut. By having a clean cut, it prevents air getting in and generating heat which is critical for feed quality while consuming less silage by reducing waste. Manageable cut blocks can be transported in compressed form, reducing handling time.
Silocut 175 SG, is a new model at 1.75 m width with 2 cylinders and weighing 524 kg, light enough for users wanting more volume in the 60-100 hp range of tractor. This fits in a new width range of 1.25 m – 2.25 m, with 25 cm increments between each model. Larger 3 cylinder models at 2 m and 2.25 m have hooks are available for BM / JCB wheel loaders as well as Front Loaders.
| Weight | 436 kg | 478 kg | 524 kg | 669 kg | 710 kg |
| Max block volume | 0.8 m³ | 0.95 m³ | 1.1 m³ | 1.25 m³ | 1.4 m³ |
| Max pressure | 210 BAR | 210 BAR | 210 BAR | 250 BAR | 250 BAR |
| Max opening | 77 cm | 77 cm | 77 cm | 77 cm | 77 cm |
| No. of cylinders | 2 | 2 | 2 | 3 | 3 |
| Cylinder sizes | 90/40 | 100/50 | 100/50 |
100/50 (x2) 90/40 (x1) |
100/50 |
| Working width | 125 cm | 150 cm | 175 cm | 200 cm | 225 cm |
| Total width | 135 cm | 160 cm | 185 cm | 210 cm | 235 cm |
SILOGRAB®
Silograb is an extremely versatile implement. The close spacing of the tines practically eliminates the spilling of silage. The tines are mounted in a box section with welded sleeves. The tines make a circular motion through the material, which produces the cleanest cut, the least power requirement and the longest service life for the tines. In addition, the material is pressed against the back of the implement when the tines are lowered, keeping the silage in place even when driving over uneven terrain.
All models have two hydraulic cylinders. On the larger models the cylinders are 15% larger than on the smaller models. Models 210 to 250 have strengthened supports in the upper part.
| Weight | 250 kg | 270 kg | 300 kg | 320 kg | 355 kg | 377 kg | 405 kg |
| Width | 130 cm | 150 cm | 170 cm | 190 cm | 210 cm | 230 cm | 250 cm |
| Volume | 0.69 m³ | 0.79 m³ | 0.90 m³ | 1.01 m³ | 1.11 m³ | 1.22 m³ | 1.33 m³ |
| Depth | 85 cm | 85 cm | 85 cm | 85 cm | 85 cm | 85 cm | 85 cm |
| Number of tines in the fork | 7+7 | 8+8 | 9+9 | 10+10 | 11+11 | 12+12 | 13+13 |
Your Choice Implements Hooks
Quicke does not only give you the largest range of implements. Our implements also have a choice of hooks for use with most brands of loaders.
A: EURO
Implement hooks suitable for Quicke series Q, Trima with W-frame and other loader brands with Euro implement carriers.
B: SMS
Suitable for Quicke Combi mount, Trima/Bergsjö with SMS- mount, Kellve/Vreten/Howard and any loader with SMS implement carrier.
C: ÅLö TypE 3
Suitable for wholly hydraulic loaders previous to Quicke Series Q. Some implements will also fit loaders with the large and the small implement carrier from BM.
SELECTO FIX*
Save time and avoid problems.
Selecto fix is a great option if you are regularly coupling and uncoupling hydraulic implements. With a simple movement, the implement hydraulics are coupled, easily and without any problems, even when the system is pressurized. Your work is resumed within seconds. This system also greatly reduces the risk of dirt entering the hydraulic system.
View Brochure
Click here to view or download the brochure.
View Quick Loaders
Click here to view more Quick Loaders.
View Product Page
Click here to view the full product page on the manufacturer's website.